Connect with us

Home improvement

How to Achieve Perfect Floor Leveling with Cement Screed



How to Achieve Perfect Floor Leveling with Cement Screed

A perfect level of one’s floor is an essential requirement of any successful flooring solution. To provide a level base where the finish is to be placed, a screed is applied. Cement screed remains one of the most dominant forms through which level floors can be achieved and in this all-inclusive guide, we will look at the various steps of achieving perfect floor leveling.

Understanding Cement Screed:

It is a mixture of cement, fine aggregate sand, and adequate water. It is used to give a smooth floor surface upon which tiles may be laid, hardwood, carpet, or other finishes installed. Due to versatility and durability, cement screed is very common in construction and building maintenance.

Proper Surface Preparation:

The cement screed has to be applied on a well-prepared substrate. As such, clean the surface, removing dirt, dust, or debris. Repair any cracks or uneven areas of the substrate using suitable materials for such repairs. Correctly carrying out all these procedures makes this base for bonding or otherwise.

Mixing the Cement Screed:

The screed shall be mixed as instructed by the manufacturer. However, the usual components are Cement, sand, and water in the correct proportions. It can be combined using a concrete screed mixer or hand mixing. Care should be taken not to add more water, resulting in a weak screed; the mix should be homogeneous.

Application of Cement Screed:

After mixing, pour the cement screed onto the prepared substrate in sections. Use a screeding board or straight edge, spread evenly. Work fast but carefully to achieve this uniform thickness across the entire area.

Screeding Process:

Screeding Start by using a screeding board or straightedge and draw this back and forth across the surface, pushing excess screed in front of you and away from your direction. This creates a level surface by filling the lowest spots and scraping the excess on high spots. Do these many times until the whole area is screeded.

Smoothing and Finishing:

After screeding, use the float or trowel to bring the surface to the finish. Work in a round to eliminate imperfections for an excellent finish. The edges and corners should be attended to ensure they are straight at proper levels.

Checking for Levelness:

The screed surface should be checked for the level using a spirit level or straightedge. To achieve consistency and accuracy in results, the level or straightedge should be placed at several points on the floor. This operation allows perfect levelling of the screed.

Curing and Drying:

Let the cement screed cure and dry as per the manufacturer’s advice. It is usually done by offering the screeded surface with plasticised sheeting that, through its wrinkles, will retain moisture and prevent rapid drying out. Proper curing is very crucial for strength and durability.

Extra Finishing Optional:

Depending on the project you’re working on, this surface may be further finished using a trowel or by floating it to produce a specific texture or smooth finish. Common Mistakes to Avoid: The three most common mistakes to avoid if one is to successfully work with cement screed are too much water put into the mix, the failure to compact the screed, or not allowing for sufficient curing time.

Benefits of Cement Screed:

Compared to other competitors, such as cement screed as a flooring solution, it has immense advantages. Even in sustenance also, due to the long-lasting nature and stability of this screed, it makes sure to provide a solid, durable base for your floor covering. Screeds can be laid in different. Finish or textures to give a distinct design upon completion. Whether interior or exterior screeds, they fit and, thus, are very versatile for any project. Along with cement screed, you will also get full compatibility with underfloor heating systems and distribute heat well around the room.

Common mistakes that you should avoid:

When carrying out a cement screeding project, there are mistakes that you must avoid in order not to compromise the floor surface. These include too much additional water in the mixture, which weakens the screed; insufficient compaction of the screed while applying it that causes uneven flooring; and insufficient curing time that results in cracks or reduces the strength of the screed. Knowing these mistakes and using precautionary measures will ensure you achieve the best results from your cement screeding project.

Key Tips for Successful Screeding of Cement: 

There are several things that should be remembered while doing cement screeding so that the work is completed successfully. Adequate planning and adequate measurement so that there is no material wastage or shortage is the first and foremost thing. Work smartly in manageable sections, as the cement screed sets pretty quickly. Suitable quality materials should be used so that good quality work is delivered through the entire stretch of work.


Perfect levelling of floors with cement screed is a perfect and durable foundation for a vast range of flooring materials. If it is prepared well, applied conscientiously, and finished with close attention to every detail. It’s pretty natural to achieve professional results in floor levelling using cement screed for your next project. Whatever the purpose – a house, office, or enterprise – along with impeccable results, excellent and long-lasting floors would be guaranteed from mastering the art of screeding.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *